A coin acrylic gift case does not have one fixed Ahmedabad price: the coin size, case construction, insert, decoration, order quantity, packing, GST and delivery terms all change the quotation. By comparing defined quantity breaks and submitting a complete dimensional brief, you can separate a genuine per-piece price from setup charges and avoid a case that fits the coin poorly.
Key takeaways
- Budget ₹150–400 for a basic single-coin acrylic holder.
- Measure coin diameter, thickness, insert depth, and closure clearance.
- Request material thickness, finish, engraving, packing, and delivery details.
- Compare samples, tolerances, minimum order quantity, and replacement terms.
What Does a Coin Acrylic Gift Case Cost in Ahmedabad?
A practical screening budget for coin acrylic for gift case price in Ahmedabad is ₹150–400 for a basic glued or friction-fit single-coin holder, ₹400–1,200 for a presentation case with a base or insert, and ₹1,200–3,500 or more for low-volume custom work with engraving, magnets, foam or premium finishing.
These are planning ranges, not a supplier quotation.
The custom coin gift case price changes with coin size, acrylic thickness, closure, branding, insert, assembly and packing. Request rates at 25, 50, 100, 250 and 500 pieces, and ask the supplier to state whether each amount is:
- Per piece
- Per set
- For a complete gift pack
Ask for a cost breakup covering:
- Acrylic
- Insert
- Engraving
- Artwork or die charges
- Assembly
- Individual packing
- GST
- Transport
A 10-piece order can carry programming, cutting or setup charges that disappear into a lower unit rate at higher volumes. Do not compare a 10-piece quote with a 500-piece quote unless both include the same case design, insert, decoration, packing, GST and delivery terms.
Also confirm whether the quote includes the coin, coin placement, retail box and sample charge. A low unit rate can become expensive once setup, packing or transport appears as a separate line.
How Should the Coin and Acrylic Case Be Sized?
A denomination is not a fit specification. Give the acrylic coin case supplier in Ahmedabad the coin’s measured diameter, total thickness, edge profile, and, if used, the capsule or sleeve’s length, width, diameter and height.
1. State the required radial clearance and depth clearance around the coin or capsule. Give the usable insert area, case internal dimensions and outside dimensions separately; also state acrylic sheet thickness and finished wall thickness, because they are not the same measurement.
2. Specify the construction: cast or extruded PMMA, transparent or coloured acrylic, and 2–6 mm sheet thickness where appropriate to the design. Choose laser-cut and solvent-bonded parts for flat construction, or CNC-machined recesses for controlled three-dimensional pockets. Add foam, EVA, felt or velvet when the insert must cushion or position the coin.
3. Set the pocket carefully. A shallow circular recess lets the coin move or fall out; an overly tight pocket makes loading difficult and can mark the edge. Ask whether visible laser-cut edges will be masked, machine-finished, flame-polished or diamond-polished.
4. Name the lid retention method: friction fit, snap fit, magnets, glued lid, hinge or mechanical closure. Keep protective film on the acrylic during production and remove it only after inspection, so scratches and adhesive marks are not hidden until delivery.
What Coin, Medal or Gift Format Can the Case Hold?
Choose the format by the contents, not by denomination, before requesting a custom coin gift case price.
| Format | Suitable case layout | Fit consideration |
|---|---|---|
| Single commemorative coin | One circular recess or lined pocket | Allow for the coin’s diameter, thickness and edge profile |
| Multiple-coin arrangement | Several recesses, stepped compartments or removable insert | Fix coin placement and spacing before cutting |
| Boxed coin set | Moulded insert with separate pockets | Match every coin and any certificate or sleeve |
| Medal | Deeper pocket or suspension layout | Check the bail, ribbon and irregular edge |
| Token | Circular recess or foam-lined pocket | Measure it like a coin; do not assume standard sizing |
| Coin with silver note | Coin pocket plus separate flat compartment | The note increases internal depth and case footprint |
A bare coin needs less internal depth than one in a protective capsule, whose lip can prevent the lid from closing. A silver note needs its own flat compartment rather than a shared recess.
Specify one or more circular recesses, stepped compartments, foam or velvet-lined pockets, removable inserts, coin placement, names and dates, logo engraving, printed artwork, colour accents and a retail gift box. A simple clear holder costs less; magnets, a hinge, moulded insert or decorative base create a premium presentation case.
Provide a physical coin, accurate drawing or clear measurements when the edge profile, capsule lip or note thickness affects fit. Approve the logo scale, engraving face, line weight, fill colour and a physical or photographed first decorated sample before the full run.
How Do You Compare an Acrylic Coin Case Supplier in Ahmedabad?
A useful RFQ lets every acrylic coin case supplier in Ahmedabad price the same specification. Send:
- Coin diameter, thickness, edge profile, capsule dimensions, required internal and outside case size
- Acrylic colour, sheet thickness, material grade such as cast or extruded PMMA, lid mechanism and insert material
- Logo artwork in vector format, delivery address, required date, and quantities of 25, 50, 100, 250 and 500 pieces
- Sample charge, refundability after order, prototype timeline, first-article approval, dimensional tolerance and visible-edge standard
- Reject or replacement policy, artwork and setup charges, GST treatment, transport terms and individual packing
For engraved work, require a physical or photographed first article. Engraving depth, front-versus-reverse placement, line weight and contrast can change the result even with identical vector artwork.
Compare quotations by the same inclusions:
| Quote item | Check | Why it matters |
|---|---|---|
| Unit basis | Per piece, set or complete gift pack | Prevents false price comparisons |
| Construction | Shell, insert, lid, assembly and packing | Exposes omitted operations |
| Commercial terms | GST, freight, sample and setup charges | Reveals total delivered cost |
| Quality control | Tolerance, visible-edge finish and replacement terms | Measures repeatability |
A supplier such as SUN ACRYLAM PVT. LTD. belongs in the comparison when its Ahmedabad fabrication capability matches the drawing, but catalogue wording is not a complete quotation. Choose the lowest repeatable delivered cost, not merely the lowest unit price.
Related product
 | Silver Note Coin Acrylic Gift Case View product → |
What Lead Time, Packing and Delivery Details Should You Confirm?
Confirm separate dates for every stage before accepting an event or gifting deadline. Ask the coin display case manufacturer in Gujarat to state available capacity and the approval cut-off; an urgent-order promise is not a confirmed schedule.
1. Request timelines for artwork checking, prototype or sample approval, production, assembly, packing and dispatch. A single “lead time” hides the stage that could delay delivery.
2. Confirm the dispatch location, delivery time within Ahmedabad, delivery time to other Gujarat cities, courier or transport method, and whether the promised date runs from payment or approval.
3. Require individual polybags or tissue separation, corner protection and a rigid outer carton for cases with visible faces. Price this protection as a separate packing line.
4. Ask whether protective film stays on until final inspection. Film scratches, corner impacts, adhesive touching the clear face, and dust trapped between lid and base cause common transit rejects.
5. Get the replacement process in writing: who pays for damaged or short-delivered pieces, how quickly replacements ship, and what photographs or delivery notes are required.
Your final purchase order should list the approved drawing, sample image, quantity, packing method, GST, freight, delivery address and promised dispatch date. These records let you audit the quoted custom coin gift case price against the goods delivered, rather than discovering missing packing or transport charges after dispatch.
Frequently asked questions
What does a coin acrylic gift case cost in Ahmedabad?
Use ₹150–400 as a screening budget for a basic glued or friction-fit single-coin holder, ₹400–1,200 for a presentation case with a base or insert, and ₹1,200–3,500 or more for low-volume custom work with engraving, magnets, foam, or premium finishing.
How should a coin and acrylic case be sized?
Measure the coin’s maximum diameter and thickness, then add clearance for the insert, edge protection, and closure. Confirm the usable internal dimensions rather than relying only on the case’s outside measurements.
What formats can an acrylic coin gift case hold?
A case can be designed for a single coin, multiple coins, medals, tokens, round awards, or irregular gifts. Provide the supplier with the item’s diameter, thickness, quantity, orientation, and insert requirements.
How do you compare an acrylic coin case supplier in Ahmedabad?
Compare material thickness, acrylic clarity, edge finish, joint quality, closure type, engraving accuracy, sample approval, minimum order quantity, and replacement terms. Ask whether the supplier manufactures locally or outsources fabrication.
What lead time, packing, and delivery details should you confirm?
Confirm the design-approval date, production lead time, dispatch date, delivery location, individual wrapping, scratch protection, carton strength, breakage responsibility, and whether a replacement shipment covers transit damage.
